Asus X441UV


Hackintosh EFI folder for Asus X441UV with OpenCore Bootloader

Asus X441UV


Hackintoshing is not user-friendly for beginner (in my personal experience). If you are not familiar with OS installation and such, please consider to try installing linux first and use it for some time. This project aims to simplify post-installation EFI setup for Asus X441UV user.


Clone or download
Install MacOS with your preferred method. Olarila Clover Vanilla for easy steps, but in step 7 afterward just copy this repo EFI folder instead of Olarila EFI folder.
Mount EFI drive. You can use MountEFI or Clover Configurator.
Copy this repo EFI folder to /Volumes/EFI/ so it will looks like this:




  • Processor : Intel® Core™ i3-6006U 2.0 Ghz (Skylake)
  • iGPU : Intel HD Graphics 520
  • dGPU : Nvidia 920MX (Disabled)
  • RAM : 4GB DDR4 2133MHz
  • Built-in Audio : ALC255 Revision 2
  • Ethernet : Realtek RTL8106E
  • Keyboard : ATK PS/2
  • Trackpad : ELAN1200 I2C
  • Bootloader: OpenCore (UEFI)
  • BIOS Version : X441UV.316

What’s worked

✅System Integrity Protection
✅Quartz Extreme and Core Image (QE/CI) graphic acceleration
✅Keyboard + Fn combination button (brightness button doesn’t work AsusSMC issue’s)
✅Intel HD Graphics 520
✅USB ports 3.0/2.0 (manually mapped with USBMap, if some ports doesn’t work consider using USBInjectAll.kext
✅Battery status
✅Trackpad + Gesture
✅Backlight Control
✅VGA port
✅Shutdown / Reboot
✅Sleep + Sleep on AC fix
✅ CPU temp
✅GUI bootloader + boot chime

Not yet tested


Not worked

❌DRM doesn’t worked on iGPU system.
❌dGPU : Nvidia 920MX (Disabled)
❌Card reader. I’ve tried this, but no luck.
❌Wifi. See notes.


  • OpenCore 0.6.6
  • Tested on Catalina 10.15.7. ==> still testing on BigSur
  • This configuration include AppleCpuPmCfgLock and AppleXcpmCfgLock fix under Kernel -> Quirks which may cause instability in long term use. Please refer to this guide for better permanent solution.
  • I replaced my wifi card for dual band wireless support. Look at this for wifi fix.
  • USB 3.0/2.0 ports were manually mapped with USBMap, if some ports doesn’t work consider using USBInjectAll.kext or remap by yourself.
  • Follow this guide for updating OpenCore and kexts.