|macOS Big Sur||macOS Catalina||macOS Mojave|
|11.3 (20E232)||10.15.7 (19H15)||10.14.6 (18G87)|
|11.2.3 (20D91)||10.15.6 (19G2021)||10.14.5 (18F132)|
|11.2.2 (20D80)||10.15.5 (19F101)||10.14.4 (18E226)|
|11.2.1 (20D74)||10.15.4 (19E287)||10.14.3 (18D42)|
|11.2 (20D64)||10.15.3 (19D76)||10.14.2 (18C54)|
|11.1 (20C69)||10.15.2 (19C57)||10.14.1 (18B75)|
|11.0.1 (20B29)||10.15.1 (19B88)||10.14 (18A389)|
If you find this bootloader configuration useful, consider giving it a star to make it more visible.
This repo contains information for getting macOS working on a Huawei MateBook X Pro (2018 Edition) laptop.
This is intended to create a “fully” functional (as far as possible) hackintosh for the Huawei Matebook X Pro. If you would like to get started with creating a hackintosh on your MBXP but have non experience, I would highly recomend following Dortania’s OpenCore Install guide and then returning here for troubleshooting. With each new release of macOS we need to resolve each new “minor issue” we run into. The installation is not perfect yet since it’s a continuos work-in-progress, but I’m glad to say that I learned a lot in the meantime. All of the steps I made to get to this point were a result of countless hours of reading along with trial and error. I am by no means an expert so any help to get this project functional is very appreciated!
AirportItlwm.kexteven Handoff and Continuity features are working, but with a very limited support for AirDrop and Apple Watch unlocking (see Changelog for OpenIntelWireless release v. 1.2.0 stable). For any issues about
AirportItlwm.kextplease refer to OpenIntelWireless Gitter Page
This repository is for personal purposes
For privacy reasons, all SMBIOS information has been wiped out in the configuration file
EFI/OC/config.plist. You need to generate your unique SMBIOS info by yourself (recommend to use CorpNewt’s GenSMBIOS), and inject them into your
|Computer model||Huawei Matebook X Pro 2018 Space Gray|
|Processor||Intel Core i7-8550U Processor @ 1.8 GHz|
|Memory||8 GB LPDDR3 2133 MHz|
|Hard Disk||LiteON SSD PCIe NVMe 512 GB [CA3-8D512]|
|Integrated Graphics||NVIDIA GeForce MX150 / Intel(R) UHD Graphics 620|
|Screen||JDI 3k Display @ 3000 x 2000 (13.9 inch)|
|Sound Card||Realtek ALC256|
|Wireless Card||Intel Dual Band Wireless-AC 8265/8275|
|Bluetooth Card||Intel Bluetooth 8265/8275|
Device Firmware Bios version:
|System configuration||GPU – OpenCL Single-Core 4618|
See Current status
GPI0interrupt mode) and native macOS gestures
VoodooI2Cversions after 2.4 are affected to a greater or lesser extent by
Multi_GPI0issues. The solution proposed so far by
VoodooI2Cdevelopers is only a workaround and not a real fix: proposing to use the
GPI0pinning for touchpad and polling method for touchscreen is not a real fix because this approach increases interrupts and causes a degrade in battery life. This being the case and not needing to use the touchscreen in my daily work, for the moment I have disabled this function pending improvements that can only come from
As reported in NotebookCheck review our Matebook X pro (2018) is utilizing only half the PCIe lanes for its single Thunderbolt 3 port (TB). Thus, its PCIe x2 Thunderbolt 3 port is only capable of providing a maximum of 20 Gbps instead of 40 Gbps when compared to a standard Thunderbolt 3 port with PCIe x4 lanes.
The connector type is Usb-C and it can do multiple protocols (TB, USB 2/3/3.1, DP, etc…) with different backing controllers. The problem on Hackintoshes is mostly about TB on Usb-C, because the firmware and power management of Apple’s TB-controllers works entirely different than those for other OS’es. So even if it’s the same hardware found on Windows laptops, they don’t “just work” because of the different firmware.
The ACPI-part for handling Thunderbolt 3 port and its power management has been implemented:
Due to lack of Thunderbolt devices my interest in this feature is very marginal; therefore, in my default
config.plist, Thunderbolt controller has been left disabled.
Steps for enabling support for Thunderbolt controller (
TB3: _GPE.NTFY,1,S to XTFYbinary patch
TB3: RP9._INI,0,N to XINIbinary patch
SSDT-DDGPU.amlto disable it in order to save power.
SSDT-XHC.amlto disable it (in order to save some power).
OpenCore 0.6.7Official release. See more info in Wiki section about migration.
PlatformInfo -> Generic - >SystemUUIDin
wmic csproduct get UUIDcommand in Windows PowerShell app
OpenCanopy: a cleaner version with custom graphics has been provided by @R-Teer
Default SMBIOS settings of this repo is
Terminalwindow, then press
git clone https://github.com/corpnewt/GenSMBIOS && cd GenSMBIOS && ./GenSMBIOS.command
2, then press
3, then press
MacBookPro14,1, then press
By default macOS only uses 2 out of our MBXP 4 speakers: if you want to achieve a surround sound system on macOS, you need to create an Aggregate Device. But then macOS does not allow you to control the volume of the sound: yes, it is real and is a general behaviour of MacBookPro machines.
For a detailed guide on how to activate surround sound via MIDI on internal speakers and native audio shortcuts, see Wiki section
Undervolting is a great way to maximise performance, lower power consumption and reduce temperatures.
For a detailed guide on how to undervolt our MBXP using
VoltageShift from the EFI folder instead of disabling SIP, see Wiki section
CPU power management can be achieved by using
CPUFriendDataProvider.kext defines how it should be done.
CPUFriendDataProvider.kext is generated for a specific CPU and power setting. The one supplied in this repository was made for
i7-8550U and is optimized for balanced performance.
CPUFriendDataProvider.kextis generated for SMBIOS
MacBookPro15,2because of Kaby Lake R architecture.
CPUFriendDataProvider.kextneed to be put in
CLOVER/ACPI/patchedfor working as normal after awake.
Sleep function works flawlessly (both via software and via clamshell) like hibernation (suspend to disk or S4 sleep). In order to get automatic sleep working properly like real Macs, the following settings are mandatory:
sudo pmset -a standby 0 sudo pmset -a powernap 0 sudo pmset -a proximitywake 0 sudo pmset -a tcpkeepalive 0 sudo pmset -a womp 0
powernapwill wake up the system from time to time to check mail, make Time Machine backups, etc…
proximitywakecan wake your machine when an iDevice is near.
tcpkeepalivehas resolved periodic wake events after setting up iCloud.
wompis wake on lan.
Default macOS setting is hibernatemode 3 i.e. sleep mode.
After every update, ALL these settings should be reapplied manually!
Hibernation mode can be enabled only via console command
sudo pmset -a hibernatemode 25 and is fully supported by Matebook X Pro (obviously using
HibernationFixup kext). If, however, you would like to disable it, then
sudo pmset -a hibernatemode 0 sudo pmset -a autopoweroff 0 sudo rm -rf /private/var/vm/sleepimage sudo touch /private/var/vm/sleepimage sudo chflags uchg /private/var/vm/sleepimage
You can verify your power settings by typing in terminal
sudo pmset -g live . If you ever want to reset these settings:
sudo pmset -a restoredefaults
About power consumption, HWMonitor reports for the idle state both before and after sleep phase the same value for “CPU package total” (0.65-0.70 W). Sleep discharge rate is about 1% every 4:30 hours (during night).
SSDT-XHC.aml is used for USB Host Controller (XHCI-Device-ID:
<2f 9d 00 00>): this file is configured to map only the necessary ports (tested with IOReg) with the correct connector type and prevent it from shutdown issues.
||Left Port type-C (Power Source) – next to 3.5mm jack port||E|
||Right Port type-A||E|
||Left Port type-C Thunderbolt||E|
||Bluetooth USB Port||I|
||Integrated HD Camera module||I|
HWMonitor is relatively old and no longer supported, but it gets the job done.
Run these lines in terminal:
defaults write com.apple.dock autohide-delay -float 0 defaults write com.apple.dock autohide-time-modifier -float 0.5 killall Dock
Apple no longer sells any Mac with a built-in optical drive, but many users still rely on CDs, DVDs, and Blu-ray discs for both work and entertainment.
How do I get rid of this icon?
Ejectmenu icon off the menu bar
Ejecticon, you can release the
Ejecticon from your menu bar.
How to add Eject icon to menu bar
Go -> Go to Folderfrom the menu bar. Alternatively, you can use the keyboard shortcut
By default (for a 13 inch MacBook Pro), the Launchpad shows the icons in 5×7 format.
Type in Terminal the following commands:
defaults write com.apple.dock springboard-rows -int 6 defaults write com.apple.dock springboard-columns -int 9;killall Dock
Relaunch the Launchpad to see the icons are changed now.
Finally you can revert to the default setting with the following commands:
defaults delete com.apple.dock springboard-rows defaults delete com.apple.dock springboard-columns defaults write com.apple.dock ResetLaunchPad -bool TRUE;killall Dock
(Warning: the last command also will remove any custom folders you have created)
sudo -v killall -9 accountsd com.apple.iCloudHelper defaults delete MobileMeAccounts rm -rf ~/Library/Accounts killall -9 accountsd com.apple.iCloudHelper sudo reboot
Windows uses local time by default while macOS uses universal time. You can switch Windows to use universal time. Open up a command prompt in Windows as an administrator and copy and paste this in:
reg add "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TimeZoneInformation" /v RealTimeIsUniversal /d 1 /t REG_QWORD /f
That will make Windows use universal time instead of local time. Then update your clock via the built-in internet time setting to update the time.
With the latest update and inclusion of the new
SSDT-KBD.aml we are now able to reconfigure the shortcuts to custom settings.
For a detailed guide on how to enable original
F10 hotkeys using native Automator app, please see Wiki section.
Otherwise, you can follow these suggestions [credit @R-Teer]:
|WhateverGreen||1.4.9||Handle Graphics card|
|AppleALC||1.5.9||Handle/fix onboard audio|
|CodecCommander||2.7.2||Fix headphone audio switch|
|HibernationFixup||1.4.0||Handle hibernate status|
|AirportItlwm||2.0.0 beta||Handle native Wi-Fi card|
|NullEthernet||1.0.6||Fake Ethernet card|
|NVMeFix||1.0.6||Fix for NVMe SSDs|
|RestrictEvents||1.0.0||Block unwanted processes|
|VoodooI2C||2.5.2||Handle I2C device|
|VoodooI2CHID||2.5.2||Touchpad I2C satellite|
|VoodooPS2Controller||2.2.2||Enable keyboard, alternative trackpad driver|
|VirtualSMC + plugins||1.2.2||SMC chip emulation|
|USBInjectAll||0.7.6||Inject USB ports|